Click to enlarge
Brand Tendon Stripper
Brand Tendon Stripper
Back to products
Bunnell Tendon Passer & Probe
Bunnell Tendon Passer & Probe

Bunnell Dissecting Probe

Bunnell Dissecting Probe

angular tip, 5-1/2″ (14.0 cm)

Bunnell Dissecting Probe is crafted for use in exploration during orthopedic surgery. It features a handle that taper at one end and features a pointed, slightly angular tip at the other. It can be used to explore areas that features many different types of tissue such as in the hand to navigate around the layers and access the areas of layers in question such as the tendons. This probe is hand crafted by certified instrument makers to conform to the highest standards in instrumentation.

Compare
Add to wishlist
SKU: UCC-01-967 Category:
Description
Name Bunnell Dissecting Probe
Lead Time Lead time advised within 48 hours of order placement.
Specialty Neuro, Ortho & Spine-Cartilage & Tendon Instruments
Material Finish Stainless Steel
Grade Premium Operating Room
Units of Measurement Each
Manufacturer Ophthalmic Zone
Sterility Non-Sterile
Usage Reusable
Reviews (0)

Reviews

There are no reviews yet.

Be the first to review “Bunnell Dissecting Probe”

Your email address will not be published. Required fields are marked *

Shipping & Delivery
wd-ship-1
wd-ship-2

MAECENAS IACULIS

Vestibulum curae torquent diam diam commodo parturient penatibus nunc dui adipiscing convallis bulum parturient suspendisse parturient a.Parturient in parturient scelerisque nibh lectus quam a natoque adipiscing a vestibulum hendrerit et pharetra fames nunc natoque dui.

ADIPISCING CONVALLIS BULUM

  • Vestibulum penatibus nunc dui adipiscing convallis bulum parturient suspendisse.
  • Abitur parturient praesent lectus quam a natoque adipiscing a vestibulum hendre.
  • Diam parturient dictumst parturient scelerisque nibh lectus.

Scelerisque adipiscing bibendum sem vestibulum et in a a a purus lectus faucibus lobortis tincidunt purus lectus nisl class eros.Condimentum a et ullamcorper dictumst mus et tristique elementum nam inceptos hac parturient scelerisque vestibulum amet elit ut volutpat.

Related products

Compare
Quick view
Add to wishlist

Tendon Passer

Read more
SKU: UCC-01-980
Tendon Passer pointed tip, 6" (15.0 cm) Tendon Passer is a unique instrument designed for the handling of tendons in a variety of surgical procedures. It is ideally suited for procedures such as repair of the flexor tendon to successfully move the proximal stump of the tendon to the finger or in many other tendon repair procedures such as of the patella. Additionally this instrument features a pointed tip that allows it to be used in general dissection to reach the specific area where the tendon or fragment of tendon is located. This passer is available in either a straight or curved profile making it suitable for a vast array of orthopedic procedures.
Compare
Quick view
Add to wishlist

Kleinert-Kutz Tendon Retriever

Read more
SKU: UCC-01-974
Kleinert-Kutz Tendon Retriever flexible serrated jaws w/ 1x2 teeth, shaft length of 5-1/8" (13.0 cm) Kleiner-Kutz Tendon Retriever is a uniquely designed instrument for use in grasping tendons from a distance and moving them or pulling them through an already made incisions. This instrument features a shaft that is 5 1/8 " long that is very slim making it able to fit through very small areas. Additionally the jaws are flexible and serrated with 1x2 teeth that allows it to clamp onto tissue areas as they are manipulated without causing damage but effectively keeping them within its hold. This instrument is available in two sizes: small with a shaft diameter of 2.0 cm and large with a shaft diameter of 2.5 mm.
Compare
Quick view
Add to wishlist

Bunnell Tendon Stripper

Read more
SKU: UCC-01-969
Bunnell Tendon Stripper round, 6" (15.0 cm) Bunnell Tendon Stripper is a specialized instrument crafted for use in orthopedic surgical procedures. This instrument is designed to strip down or whittle down tendons to an appropriate size. This can be useful in tendon graft procedures or in other surgical interventions of the tendons that require for the diameter of it to be stepped down. Additionally this instrument is available in a range of sizes from 2.0 – 7.0 mm diameter making it adequate for any patient need or surgeon preference.
Compare
Quick view
Add to wishlist

Hoen Grasping Forceps

Read more
SKU: UCC-01-973
Hoen Grasping Forceps serrated, 1x2 teeth, 5-1/2" (14.0 cm) Hoen Grasping Forceps are a uniquely designed instrument that can be used in a variety of surgical procedures. This instrument has jaws that are set at an angle to the ring handles that allows the jaws to be parallel to the body or site of grasping while the handle is able to remain comfortably out of the field of surgery. The jaws of these forceps are serrated and feature 1x2 teeth which further aids in their ability to grasp many different tissue layers and surfaces.
Compare
Quick view
Add to wishlist

Caroll Tendon Pulling Forceps

Read more
SKU: UCC-01-971
Caroll Tendon Pulling Forceps curved shaft, alligator type, 2.0 mm x 8.0 mm serrated jaws, 5-1/2" (14.0 cm) overall length Caroll Tendon Pulling Forceps are ideally suited for use in orthopedic procedures. Specifically they can be used to repair torn or disconnected tendons or can be used to keep a hold of a tendon as a muscle is being manipulated throughout surgery. This forceps can be used in procedures such as tendon transfer of the hand to regain lost hand function or to repair a complete tear of the patellar tendon. This instrument features a curved shaft with serrated jaws and is of the alligator type which gives it unparalleled reach for accessing tendon in a variety of locations.
Compare
Quick view
Add to wishlist

Bunnell Tendon Passer & Probe

Read more
SKU: UCC-01-968
Bunnell Tendon Passer & Probe malleable, 5.0 mm diameter Bunnell Tendon Passer and Probe is a versatile instrument ideally suited for use in orthopedic surgical procedures. It is a malleable instrument that is designed to deliver tendons to the area where they are needed. This can be useful in procedures such as repair of tendons in the hand in which it is necessary to guide the tendon through the lumbrical canal and navigate other crucial areas with the tendon. This instrument doubles as a probe and can be used in general exploration of areas before using it to guide a tendon. This instrument is available in either 7.25" or 9" making it suitable for a variety of patient needs and surgeon preferences.
Compare
Quick view
Add to wishlist

Brand Tendon Stripper

Read more
SKU: UCC-01-966
Brand Tendon Stripper round head Brand Tendon Stripper is a crafted for use in alteration of tendon diameter in a variety of orthopedic procedures. Many procedures such a repair of tendons of the hand to restore function or reconstruction of the anterior cruciate ligament can benefit from this instrument. Additionally this stripper can be a key instrument in tendon grafting procedures as well as in modification during repair. This instrument features a round head and is available in a 3.0 to 6.0 mm diameter.
Compare
Quick view
Add to wishlist

Tendon Guide Forceps (Tendon Retriever)

Read more
SKU: UCC-01-979
Tendon Guide Forceps (Tendon Retriever) double-action, serrated jaws with 1x2 teeth, 8" (20.0 cm) Tendon Guide Forceps are a unique instrument crafted for use in surgical procedures that require handling and manipulation of tendons. It is also known as a tendon retriever. These forceps are double-action and features serrated jaws with 1x2 teeth which allow it adequate hold on the tendon as it moves it around and repositions it. This can be used in a variety of orthopedic surgeries that require tendon grafting or other maneuvers of the tendon such as in patellar tendon surgery. These forceps are 8" and are available in either a straight or curved jaw.