Click to enlarge
Graham Dura Hook
Graham Dura Hook
Back to products
Hoen Hemilaminectomy Retractor
Hoen Hemilaminectomy Retractor

Haverfield-Scoville Hemilaminectomy Retractor

w/ hinged arms, maximum spread 5″ (12.5 cm)Haverfield-Scoville Hemilaminectomy Retractors are suitable for use in neurosurgical procedures in which it is necessary to retract soft tissue layers. These retractors are designed specifically for use in hemilaminectomy procedures in which half of the vertebral arch is cut and removed. This instrument features two hinged arms that can be repositioned and the width adjusted up to a maximum spread of 5″. It is available as the frame only or complete with hook and one blade.

Compare
Add to wishlist
SKU: UCC-01-1047 Category:
Description
Name Haverfield-Scoville Hemilaminectomy Retractor
Lead Time Lead time advised within 48 hours of order placement.
Specialty Neuro, Ortho & Spine-Retractors
Material Finish Stainless Steel
Grade Premium Operating Room
Units of Measurement Each
Manufacturer Ophthalmic Zone
Sterility Non-Sterile
Usage Reusable
Reviews (0)

Reviews

There are no reviews yet.

Be the first to review “Haverfield-Scoville Hemilaminectomy Retractor”

Your email address will not be published. Required fields are marked *

Shipping & Delivery
wd-ship-1
wd-ship-2

MAECENAS IACULIS

Vestibulum curae torquent diam diam commodo parturient penatibus nunc dui adipiscing convallis bulum parturient suspendisse parturient a.Parturient in parturient scelerisque nibh lectus quam a natoque adipiscing a vestibulum hendrerit et pharetra fames nunc natoque dui.

ADIPISCING CONVALLIS BULUM

  • Vestibulum penatibus nunc dui adipiscing convallis bulum parturient suspendisse.
  • Abitur parturient praesent lectus quam a natoque adipiscing a vestibulum hendre.
  • Diam parturient dictumst parturient scelerisque nibh lectus.

Scelerisque adipiscing bibendum sem vestibulum et in a a a purus lectus faucibus lobortis tincidunt purus lectus nisl class eros.Condimentum a et ullamcorper dictumst mus et tristique elementum nam inceptos hac parturient scelerisque vestibulum amet elit ut volutpat.

Related products

Compare
Quick view
Add to wishlist

Campbell Nerve Retractor

Read more
SKU: UCC-01-1009
10.5 mm wide blade, 8-7/8" (22.5 cm) Campbell Nerve Retractor is specially designed for use in neurosurgical and other procedures that require manipulation and retraction of nerves. This retractor features a ribbed handle from which extends a slightly curved neck and a retraction blade. The slightly sloping the neck gives this an ideal contour for use in the spinal surgery or in craniotomies.
Compare
Quick view
Add to wishlist

Beckmann Laminectomy Retractor

Read more
SKU: UCC-01-1002
hinged arms, 4x4 sharp prongs, 17.0 mm deep, 12-1/8" (31.0 cm)Beckman Laminectomy Retractor is made for use in neurosurgical procedures of the spinal cord. Specifically this retractor can be used in laminectomy procedures in which the lamina of the vertebrate is removed. This retractor can be used to push aside the muscle and soft tissue layers that lie directly above the spinal cord. The ring handles and ratcheting mechanism make it easy to operate manually and to lock into the appropriate width. Additionally this retractor has sharp prongs and hinged arms to keep a firm grip on the tissue it is retracting.
Compare
Quick view
Add to wishlist

Blount Knee Retractor

Read more
SKU: UCC-01-1007
6.0 mm distal tip, 7" (17.5 cm) Blount Knee Retractor is a specialized instrument that is made for use in arthroplasty surgeries. The long narrow portion of this can be slid above the capsular ligament at the joint. It can also be fit around knee implants and thus is suitable for use in knee revision.
Compare
Quick view
Add to wishlist

Cervical Retractor Lateral Blade

Read more
SKU: UCC-01-1020
stainless steel, ball snap closure, w/ teeth Cervical Retractor Lateral Blade is an added component to be used alongside the cervical retractor for medial retraction. All five blades are made from stainless steel and a ball snap closure making them a tight fit. Each blade also features teeth that are variety in their size and curvature making it possible to find a suitable blade for soft tissue retraction in a number of neurosurgical scenarios and approaches to the spinal cord.
Compare
Quick view
Add to wishlist

Cervical Retractor Medial Blade

Read more
SKU: UCC-01-1022
stainless steel, ball snap closure, w/ teeth Cervical Retractor Medial Blade is an added component to be used alongside the cervical retractor for medial retraction. All five blades are made from stainless steel and a ball snap closure making them a tight fit. Each blade also features teeth that are variety in their size and curvature making it possible to find a suitable blade for soft tissue retraction in a number of neurosurgical scenarios and approaches to the spinal cord.
Compare
Quick view
Add to wishlist

Caspar Type Counter-Retractor

Read more
SKU: UCC-01-1014
Caspar Type Counter-Retractor is a specialized instrument made for retraction of soft tissue during neurosurgical procedures. This retractor is available as a frame with six different blades ranging from 35.0 mm to 60.0 mm in 5.0 mm increments. The variety of sizes of blades allows this retractor to be suitable for many different patients and surgeon preferences.
Compare
Quick view
Add to wishlist

Carbon Fiber Radiolucent Medial Blade

Read more
SKU: UCC-01-1012
ball snap closure, w/ teeth Carbon Fiber Radiolucent Medial Blade is an added component to be used alongside the cervical retractor for general purpose soft tissue retraction. All six blades are made from stainless steel and a ball snap closure making them a tight fit. Each blade also features teeth giving them added hold in retraction. They are available in variety of sizes making it possible to find a suitable blade for soft tissue retraction in a number of neurosurgical scenarios and approaches to the spinal cord. Additionally this instrument is radiolucent which allows it to be left in place during x-ray and can be seen through.
Compare
Quick view
Add to wishlist

Cervical Retractor Fenestrated Blade

Read more
SKU: UCC-01-1019
stainless steel, ball snap closure, bluntCervical Retractor Fenestrated Blade is an added component to be used alongside the cervical retractor for general purpose soft tissue retraction. Both blades are made from stainless steel and a ball snap closure making them a tight fit. Each blade also features a blunt edge to prevent trauma and tearing during retraction and the fenestrations increase the surface area over which the pressure is distributed. They are available in variety of sizes and curvatures making it possible to find a suitable blade for soft tissue retraction in a number of neurosurgical scenarios and approaches to the spinal cord.