Click to enlarge
Wilde Ivd Rongeur
Wilde Ivd Rongeur
Back to products
Adson Aneurysm Needle
Adson Aneurysm Needle

Williams Discectomy Rongeur

5-1/2″ (14.0 cm) Williams Discectomy Rongeur is a unique instrument made for use in surgical procedures that require manipulation of the intervertebral discs. This rongeur is specifically designed for use in discectomies that can be done to alleviate pain that can be associated with herniated discs. This instrument features ring handled grips that allows it to be comfortably manipulated manually.

Compare
Add to wishlist
SKU: UCC-01-1136 Category:
Description
Name Williams Discectomy Rongeur
Lead Time Lead time advised within 48 hours of order placement.
Specialty Neuro, Ortho & Spine-Intervertebral Disc Rongeurs
Material Finish Stainless Steel
Grade Premium Operating Room
Units of Measurement Each
Manufacturer Ophthalmic Zone
Sterility Non-Sterile
Usage Reusable
Reviews (0)

Reviews

There are no reviews yet.

Be the first to review “Williams Discectomy Rongeur”

Your email address will not be published. Required fields are marked *

Shipping & Delivery
wd-ship-1
wd-ship-2

MAECENAS IACULIS

Vestibulum curae torquent diam diam commodo parturient penatibus nunc dui adipiscing convallis bulum parturient suspendisse parturient a.Parturient in parturient scelerisque nibh lectus quam a natoque adipiscing a vestibulum hendrerit et pharetra fames nunc natoque dui.

ADIPISCING CONVALLIS BULUM

  • Vestibulum penatibus nunc dui adipiscing convallis bulum parturient suspendisse.
  • Abitur parturient praesent lectus quam a natoque adipiscing a vestibulum hendre.
  • Diam parturient dictumst parturient scelerisque nibh lectus.

Scelerisque adipiscing bibendum sem vestibulum et in a a a purus lectus faucibus lobortis tincidunt purus lectus nisl class eros.Condimentum a et ullamcorper dictumst mus et tristique elementum nam inceptos hac parturient scelerisque vestibulum amet elit ut volutpat.

Related products

Compare
Quick view
Add to wishlist

Cloward-Style Rongeurs

Read more
SKU: UCC-01-1120
serrated, 6.0 mm x 10.0 mm jaws, 5" (12.5 cm) Cloward-Style Rongeur is an instrument ideally suited for use in neurosurgical orthopedic procedures. Specifically these rongeurs are made for handling the fibro-cartilaginous layers between each vertebrae which are the intervertebral discs. This instrument has ring handles and the jaws are set at an angle from the handle which allows for the handle to remain accessible while the jaws are deep in the surgical field. Additionally the terminal end with the serrated jaws is available straight, angled up or angled down making it the perfect fit for a vast array of surgical procedures.
Compare
Quick view
Add to wishlist

Cushing Ivd Rongeur

Read more
SKU: UCC-01-1121
2.0 mm x 10.0 mm jawsCushing IVD Rongeur is ideally suited for use in orthopedic neurosurgical procedures. It is specifically designed for use in manipulation of intervertebral disks. Generally it can be used in discectomy produces to remove a herniated disc. Additionally it can be used in intervertebral disc arthoplasty or total disc replacement procedures to alleviate spinal pain. The jaws of this rongeur features teeth that allow it to more securely grasp the IVD and it is available in straight profile or angled up or down.
Compare
Quick view
Add to wishlist

Caspar-Type Ivd Rongeur

Read more
SKU: UCC-01-1119
double fenestrated jaw, back of cup serrated Caspar-Type IVD Rongeur is ideally suited for use in neurosurgical spinal procedures in which the intervertebral discs are handled. A vast array of spinal procedures including treatments for herniated discs such as discectomies will find this rongeur highly useful. Additionally this rongeur features a cup that is serrated at the back as well as a double fenestrated jaw which gives it a superior surface area to force applied ratio that causes less deformation of the delicate fibro-cartilaginous IVD. This rongeur is available in two lengths 6.25" and 7.25" as well as straight, angled up, angled down.
Compare
Quick view
Add to wishlist

Cushing Slender Rongeur

Read more
SKU: UCC-01-1123
1.5 mm x 10.0 mm slender jaws Cushing Slender Rongeur is an instrument ideally suited for use in neurosurgical orthopedic procedures that require cutting or clipping of the intervertebral discs (IVDs). This fibrocartilagenous layer lies between the vertebrae of the spine. A variety of spinal procedures including discectomies require manipulation of IVDs and this rongeur is designed to do so. It features a ring handle design which aids in manual operation as well as the jaws being set at an angle from the handles allowing them to be immersed in the field while the handles are still easily accessible. This instrument is available in two lengths 7" and 9" and either straight or angled up or down.
Compare
Quick view
Add to wishlist

Intervertebral Disc Rongeur

Read more
SKU: UCC-01-1127
delicate, 3.0 mm x 10.0 mm cups, 6" (15.2 cm) Intervertebral Disc Rongeur is unique designed for use in neurosurgical orthopedic surgeries of the spine. This particular rongeur is of a delicate design and features 3.0 x 10.0 mm cups. Between each spinal vertebrae is a fibro-cartilaginous disc that is the intervertebral disc. Many spinal surgeries require manipulation of these discs such as herniated disc repair. This rongeur is available in three profiles: straight, curved up and curved down making it suitable for a wide variety of patient needs and surgeon preferences.
Compare
Quick view
Add to wishlist

Decker Rongeur

Read more
SKU: UCC-01-1124
1.5 mm x 5.0 mm cups, 5-1/2" (14.0 cm) Decker Rongeur is crafted for use in orthopedic neurosurgical procedures of the spinal cord. These rongeurs are specially designed to handle the unique fibro-cartilagenous sections found between each vertebrae the intervertebral discs. A variety of spinal surgical procedures such as arthoplasty or discectomies can find use for this rongeur. Additionally it is available in a variety of profiles include straight, curved left, curved right, angled down or angled up making is suitable for access to the IVD from a variety of angles.
Compare
Quick view
Add to wishlist

Caspar Rongeur

Read more
SKU: UCC-01-1118
cup jaws, 6" (15.2 cm) Caspar Rongeur is a made for use in a variety of spinal surgeries. These rongerus are specifically designed for handling the fibro-cartilagenous structures that are found interspersed between each vertebrae which are the intervertebral discs. The ring handle design allows for optimal manual operation so as to preserve the structure of the disc but effectively grip it. This can be used in procedures such as discectomies and a vast array of other spinal surgeries. Additionally this instrument is features cup jaws and is available in straight, up or down profile making it suitable for any particular surgical approach of surgeon preference.
Compare
Quick view
Add to wishlist

Jackson Ivd Rongeur

Read more
SKU: UCC-01-1128
fenestrated jaws, 4.0 mm x 8.0 mm, 70 degrees up-angled, 7" (17.8 cm) Jackson IVD Rongeur is a highly specialized instrument made for use in handling the intervertebral discs. Between each bony vertebrae there is a fibro-cartilaginous segment that allows for cushioning of the vertebral column as the patient moves. A number of spinal procedures such as discectomies require the use of such an instrument to surgically repair a herniated disc. The unique design of this rongeur features fenestrated jaws which allows for the pressure applied to be spread over a larger surface area thus reducing any deformation of the IVD.