Click to enlarge
Needle Nose Locking Pliers
Needle Nose Locking Pliers
Back to products
Needle Nose Pliers - Delicate Jaws W/ Groove
Needle Nose Pliers - Delicate Jaws W/ Groove

Needle Nose Pliers – Delicate Jaws

delicate, 4-3/4″ (12.1 cm) Needle Nose Pliers are crafted for use in manipulate of surgical wire such as k-wire. Wire is a widely used accessory in surgical interventions because it can be used to approximate a fracture and speed up the healing process or it can be inserted through the skin and bone to give increased traction. These pliers can be used to twist and manipulate the wire into whatever orientation is required. Additionally this instrument of a delicate pattern and is available with either smooth jaws or serrated jaws to satisfy any surgical scenario or surgeon preferences. Please note that website images are often representative

Compare
Add to wishlist
SKU: UCC-01-1297 Category:
Description
Name Needle Nose Pliers – Delicate Jaws
Lead Time 0-3 days
Competitor ;1450-10;1450-20;1450-10_1450-20;
Specialty Neuro, Ortho & Spine-Wire/Pin Cutters & Pliers
Material Finish Stainless Steel
Grade Premium Operating Room
Units of Measurement Each
Manufacturer Ophthalmic Zone
Sterility Non-Sterile
Usage Reusable
Reviews (0)

Reviews

There are no reviews yet.

Be the first to review “Needle Nose Pliers – Delicate Jaws”

Your email address will not be published. Required fields are marked *

Shipping & Delivery
wd-ship-1
wd-ship-2

MAECENAS IACULIS

Vestibulum curae torquent diam diam commodo parturient penatibus nunc dui adipiscing convallis bulum parturient suspendisse parturient a.Parturient in parturient scelerisque nibh lectus quam a natoque adipiscing a vestibulum hendrerit et pharetra fames nunc natoque dui.

ADIPISCING CONVALLIS BULUM

  • Vestibulum penatibus nunc dui adipiscing convallis bulum parturient suspendisse.
  • Abitur parturient praesent lectus quam a natoque adipiscing a vestibulum hendre.
  • Diam parturient dictumst parturient scelerisque nibh lectus.

Scelerisque adipiscing bibendum sem vestibulum et in a a a purus lectus faucibus lobortis tincidunt purus lectus nisl class eros.Condimentum a et ullamcorper dictumst mus et tristique elementum nam inceptos hac parturient scelerisque vestibulum amet elit ut volutpat.

Related products

Compare
Quick view
Add to wishlist

Flat Nose Pliers – Slender Jaws

Read more
SKU: UCC-01-1279
slender jaws, 2.0 mm tip, 6" (15.2 cm) Flat Nose Pliers and Cutter is a multi-functional instrument that can be used as a pliers to manipulate the wire but also as a cutter to trim it to the appropriate length. This combination instrument also features a tapered jaw that allows it to access some areas that are more difficult to get to. Additionally, the flat nose prevents any trauma to surrounding tissue areas.
Compare
Quick view
Add to wishlist

Kirschner Bow

Read more
SKU: UCC-01-1289
Kirschner Bow is an instrument that can be used in a variety of orthopedic surgical procedures. A kirschner wire can be used to stabilize and approximate fractures after surgical repair. These wires can be quite easy to insert but must be manipulated with the proper instrumentation such as this bow. This bow applies a longitudinal force of tension that prevents rotation of the wire within the apparatus. This instrument is available in three sizes: medium, large and extra large as well as a set of 3 extra hooks for the krischner bow.
Compare
Quick view
Add to wishlist

Flush Wire Cutter – Tungsten Carbide

Read more
SKU: UCC-01-1280
tungsten carbide jaws, double-action, front & side cutting, cuts up to 1/16" (1.7 mm) diameter hard wire, 7" (17.8 cm) Flush Wire Cutter is an instrument designed for use in cutting wires during surgical procedures. A variety of procedures require the insertion of wire to stabilize an inserted graft or fracture repair. This decreases potential for trauma and increases the speed of healing. This cutter features double-action tungsten carbide jaws that allow for precise cuts on wire up to 1.7 mm diameter. This instrument can be used for both front and side cutting.
Compare
Quick view
Add to wishlist

Flat Nose Pliers

Read more
SKU: UCC-01-1277
serrated jaws, 5-1/2" (14.0 cm) Flat Nose Pliers are ideally suited for use in manipulation of wire. Particularly these pliers can be used in situations where it is required to make very sharp, angled bends in the wire. The wider tip makes this instrument ideal for grasping Steinmann pins and K-wires. Additionally this instrument measure 5.5" long and is forged from premium German grade steel making it a finely crafted and reliable instrument.
Compare
Quick view
Add to wishlist

Hercules-Type Front & Side Cutter

Read more
SKU: UCC-01-1284
replaceable tungsten carbide blades w/ integrated rubber jaws, for max 1.6 mm drill wire, 7" (17.8 cm)Hercules-Type Front & Side Cutter is a multi-purpose instrument suitable for a variety of orthopedic procedures in which wire or pins are used. Fracture repair procedures can utilize pins to set the bone fragments or can be approximated by wrapping wire around. This instrument is ideally suited for manipulation of wire and pins as well as cutting them either from a front or a side approach. This instrument features replaceable tungsten carbide jaws with integrated rubber jaws for a maximum 1.6 mm drill wire.
Compare
Quick view
Add to wishlist

Blunt Jaw Pliers

Read more
SKU: UCC-01-1265
5-1/2" (14.0 cm) Blunt Jaw Pliers can be used in a variety of surgical procedures that require the insertion and manipulation of wires. This instrument features slightly rounded handles which makes it easy to hold and operate manually and is a traditionally utility poliers with adjustable jaws. The blunt jaws prevent breakage and splintering of the wire and allows for increased pressure to reshape it to the appropriate shape. Wires can be used to approximate fractures or can be inserted through skin and bone to provide traction on the bone.
Compare
Quick view
Add to wishlist

Diamond Pin Wire Cutter

Read more
SKU: UCC-01-1272
cuts up to 5/64" (2.0 mm) diameter hard wire, 6-1/2" (16.5 cm) Diamond Pin Wire Cutter is a specially designed instrument crafted for use in cutting wire. Many different neurosurgical and orthopedic procedures require the insertion of wire to give the areas additional stability and this cutter can be used to clip these at the desired length. Not only can this instrument be used to trim wire but also surgical pins. Fracture repair and other bone repair surgeries has to be set with pins that also need to be trimmed using this instrument. This instrument is available in two designs: stainless steal or tungsten carbide both of which can cup up to a diameter of 2.0 mm.
Compare
Quick view
Add to wishlist

Corwin Wire Twister

Read more
SKU: UCC-01-1269
tungsten carbide, serrated jaws, long tips, 6-1/4" (15.9 cm) Corwin Wire Twister is a specialized instrument crafted to handle wire. Wires can e placed in a variety of surgical settings that require addition of and manipulation of wire. Producedures such as laminectomies require for the vertebrae to be stabilized so that it may heal correctly and reduce trauma to the spine. This twister features tungsten carbide inserts which confer stability as well as serrated jaws which gives them an additional stable grasp on the wire. Additionally this twister has long tips that allow it to fit into some tighter spaces.