Click to enlarge
Needle Nose Pliers - Delicate Jaws W/ Groove
Needle Nose Pliers - Delicate Jaws W/ Groove
Back to products
Sternal Needle Holder & Wire Twister
Sternal Needle Holder & Wire Twister

Needle Nose Pliers – Standard Jaws

standard, 5-1/2″ (14.0 cm)Needle Nose Pliers are crafted for use in manipulate of surgical wire such as k-wire. Wire is a widely used accessory in surgical interventions because it can be used to approximate a fracture and speed up the healing process or it can be inserted through the skin and bone to give increased traction. These pliers can be used to twist and manipulate the wire into whatever orientation is required. Additionally this instrument of a standard pattern and is available with either smooth jaws or serrated jaws to satisfy any surgical scenario or surgeon preferences.

Add to wishlist
Compare
Make An Enquiry
SKU: UCC-01-1299 Category:
Name Needle Nose Pliers – Standard Jaws
Lead Time 0-3 days
Competitor ;1450-30;401775;40-1775;KM48245;4017-75;1450-30_4017-75;
Specialty Neuro, Ortho & Spine-Wire/Pin Cutters & Pliers
Material Finish Stainless Steel
Grade Premium Operating Room
Units of Measurement Each
Manufacturer Ophthalmic Zone
Sterility Non-Sterile
Usage Reusable

Reviews

There are no reviews yet.

Be the first to review “Needle Nose Pliers – Standard Jaws”

Your email address will not be published. Required fields are marked *

wd-ship-1
wd-ship-2

MAECENAS IACULIS

Vestibulum curae torquent diam diam commodo parturient penatibus nunc dui adipiscing convallis bulum parturient suspendisse parturient a.Parturient in parturient scelerisque nibh lectus quam a natoque adipiscing a vestibulum hendrerit et pharetra fames nunc natoque dui.

ADIPISCING CONVALLIS BULUM

  • Vestibulum penatibus nunc dui adipiscing convallis bulum parturient suspendisse.
  • Abitur parturient praesent lectus quam a natoque adipiscing a vestibulum hendre.
  • Diam parturient dictumst parturient scelerisque nibh lectus.

Scelerisque adipiscing bibendum sem vestibulum et in a a a purus lectus faucibus lobortis tincidunt purus lectus nisl class eros.Condimentum a et ullamcorper dictumst mus et tristique elementum nam inceptos hac parturient scelerisque vestibulum amet elit ut volutpat.

RELATED PRODUCTS

Compare
Quick view
Add to wishlist

Corwin Wire Twister

Read more
SKU: UCC-01-1269
tungsten carbide, serrated jaws, long tips, 6-1/4" (15.9 cm) Corwin Wire Twister is a specialized instrument crafted to handle wire. Wires can e placed in a variety of surgical settings that require addition of and manipulation of wire. Producedures such as laminectomies require for the vertebrae to be stabilized so that it may heal correctly and reduce trauma to the spine. This twister features tungsten carbide inserts which confer stability as well as serrated jaws which gives them an additional stable grasp on the wire. Additionally this twister has long tips that allow it to fit into some tighter spaces.
Compare
Quick view
Add to wishlist

Flat Nose Pliers & Cutter

Read more
SKU: UCC-01-1278
3.5mm tip, cuts 0.2 mm to 1.5 mm wire, 6-1/2" (16.5 cm) Flat Nose Pliers are ideally suited for use in manipulation of wire. Particularly these pliers can be used in situations where it is required to make very sharp, angled bends in the wire. The delicate jaw of this instrument tapers to 2 mm which allows it to be used in manipulating cerclage wire. Additionally this instrument measure 6" long and is forged from premium German grade steel making it a finely crafted and reliable instrument.
Compare
Quick view
Add to wishlist

Flush Wire Cutter – Tungsten Carbide

Read more
SKU: UCC-01-1280
tungsten carbide jaws, double-action, front & side cutting, cuts up to 1/16" (1.7 mm) diameter hard wire, 7" (17.8 cm) Flush Wire Cutter is an instrument designed for use in cutting wires during surgical procedures. A variety of procedures require the insertion of wire to stabilize an inserted graft or fracture repair. This decreases potential for trauma and increases the speed of healing. This cutter features double-action tungsten carbide jaws that allow for precise cuts on wire up to 1.7 mm diameter. This instrument can be used for both front and side cutting.
Compare
Quick view
Add to wishlist

Front & Side Wire Cutter – Tungsten Carbide

Read more
SKU: UCC-01-1281
tungsten carbide jaws, double-action, 1/16" (1.7 mm) maximum capacity, 7-1/8" (18.1 cm) Front and Side Wire Cutter is designed for use in surgical procedures that require manipulation of the length of surgical wire. In procedures such as laminectomies or total hip replacements insertion of a wire is necessary to confer some stability to the newly operated upon region. Not only does this give stability but speeds up the healing time and prevents trauma to the area during the healing process. This particular cutter is a front and side cutter and features double action tungsten carbide jaws that has a maximum capacity of 1.7 mm.
Compare
Quick view
Add to wishlist

Hercules-Type Wire Cutter – 4.0 mm Wire Max

Read more
SKU: UCC-01-1287
for drill-wires of 2.5 - 4.0 mm, replaceable tungsten carbide blades & replaceable rubber jaws, 11" (27.9 cm) Hercules-Type Wire Cutter is a highly reliable instrument made for use in a variety of surgical procedures that require wire and thus cutting of wire. This wire cutter is specifically designed for use with drill-wires at a maximum ranging from 2.5 – 4.0 mm. This instrument features replaceable tungsten carbide blades which are inherently more durable than stainless steel and have an extended service-life. It also features replaceable rubber jaws making it highly versatile and customizable to accommodate a vast array of surgical scenarios. This instrument is available in either a standard design or left-handed.