Click to enlarge
Pin Cutter - End Cutting
Pin Cutter - End Cutting
Back to products
Pin Cutter - Side Cutting
Pin Cutter - Side Cutting

Pin Cutter – End Cutting, Tungsten Carbide

end cutting, tungsten carbide Pin Cutter is an instrument ideally suited for use in a variety of surgical procedures that require insertion and length adjustment to wire. A unique feature of this instrument is the pin block which minimizes the changes of the jaws being overloaded. Additionally there is an adjustment nut which enables the blades to be adjusted during heavy use or after the blade has been replaced. This instrument is suited for side cutting and is available in three lengths 16″, 18.5″ and 22″ and with varied max cutting capacity 4.7 mm, 6.3 and 6.3 mm respectively.

Add to wishlist
Compare
Make An Enquiry
SKU: UCC-01-1303 Category:
Name Pin Cutter – End Cutting, Tungsten Carbide
Lead Time Lead time advised within 48 hours of order placement.
Competitor ;3245-49;3245-59;3245-49_3245-59;
Specialty Neuro, Ortho & Spine-Wire/Pin Cutters & Pliers
Material Finish Stainless Steel/Tungsten Carbide
Grade Premium Operating Room
Units of Measurement Each
Manufacturer Ophthalmic Zone
Sterility Non-Sterile
Usage Reusable

Reviews

There are no reviews yet.

Be the first to review “Pin Cutter – End Cutting, Tungsten Carbide”

Your email address will not be published. Required fields are marked *

wd-ship-1
wd-ship-2

MAECENAS IACULIS

Vestibulum curae torquent diam diam commodo parturient penatibus nunc dui adipiscing convallis bulum parturient suspendisse parturient a.Parturient in parturient scelerisque nibh lectus quam a natoque adipiscing a vestibulum hendrerit et pharetra fames nunc natoque dui.

ADIPISCING CONVALLIS BULUM

  • Vestibulum penatibus nunc dui adipiscing convallis bulum parturient suspendisse.
  • Abitur parturient praesent lectus quam a natoque adipiscing a vestibulum hendre.
  • Diam parturient dictumst parturient scelerisque nibh lectus.

Scelerisque adipiscing bibendum sem vestibulum et in a a a purus lectus faucibus lobortis tincidunt purus lectus nisl class eros.Condimentum a et ullamcorper dictumst mus et tristique elementum nam inceptos hac parturient scelerisque vestibulum amet elit ut volutpat.

RELATED PRODUCTS

Compare
Quick view
Add to wishlist

Berry Sternal Needle Holder & Wire Twister

Read more
SKU: UCC-01-1264
tungsten carbide inserts, heavy pattern, 6.0 mm jaws, 7-3/4" (19.5 cm) Berry Sternal Needle Holder & Wire Twister is a highly versatile instrument that is useful in a vast array of surgical settings. Not only does it serve as a needle holder to aid in suturing during and at the close of surgery but it has other uses as well. The same ability to grip that makes it ideal for use in needle manipulation also makes it ideally suited for twisting wire. Many procedures require the placement of a wire to hold something together or to give some temporary stability while the body heals.
Compare
Quick view
Add to wishlist

Cannulated Pin Cutter

Read more
SKU: UCC-01-1268
end cutting, max cutting capacity 1/16" (1.7 mm), 7-1/2" (19.0 cm) Cannulated Pin Cutter is a specialized instrument ideally suited or use in procedures of fracture repair or other procedures where a graft is set with a pin. The unique design of this cutter allows for effective end cutting. The entire head portion of the pin can be inserted into the cutter and clipped flush and the remaining clipped portion remains held in the cutter to be removed. The maximum cutting capacity of this pin cutter is 1.7 mm.
Compare
Quick view
Add to wishlist

Flat Nose K-Wire Pliers

Read more
SKU: UCC-01-1276
serrated jaws, 7" (17.8 cm), 3.0 mm tip Flat Nose K-Wire Pliers are instruments ideally suited for use with surgical K-wire. This wire can be used for temporary fixation in some procedures thus giving support through the healing process and then can be removed. Additionally K-wire can be used in permanent fixation and can also be passed through the skin and bone to provide direct traction to the bone itself. In all of this surgical scenarios this instrument will be of optimal function in manipulation and handling of the wire and features serrated jaws which gives added hold and grip to prevent slipping. This instrument is available with or without a grooved jaw.
Compare
Quick view
Add to wishlist

Flat Nose Pliers – Slender Jaws

Read more
SKU: UCC-01-1279
slender jaws, 2.0 mm tip, 6" (15.2 cm) Flat Nose Pliers and Cutter is a multi-functional instrument that can be used as a pliers to manipulate the wire but also as a cutter to trim it to the appropriate length. This combination instrument also features a tapered jaw that allows it to access some areas that are more difficult to get to. Additionally, the flat nose prevents any trauma to surrounding tissue areas.
Compare
Quick view
Add to wishlist

Flat Nose Pliers & Cutter

Read more
SKU: UCC-01-1278
3.5mm tip, cuts 0.2 mm to 1.5 mm wire, 6-1/2" (16.5 cm) Flat Nose Pliers are ideally suited for use in manipulation of wire. Particularly these pliers can be used in situations where it is required to make very sharp, angled bends in the wire. The delicate jaw of this instrument tapers to 2 mm which allows it to be used in manipulating cerclage wire. Additionally this instrument measure 6" long and is forged from premium German grade steel making it a finely crafted and reliable instrument.