Click to enlarge
Pin Cutter - Side Cutting
Pin Cutter - Side Cutting
Back to products
Replacement Parts For Hercules-Type Instruments
Replacement Parts For Hercules-Type Instruments

Pin Cutter – Side Cutting, Tungsten Carbide

side cutting, tungsten carbide Pin Cutter is a specialized cutting instrument designed to cut pins. This instrument features tungsten carbide jaws which are inherently more durable than stainless steel as well as gold plated. Clinical will experiences the benefits of this increased stability but additionally and extended service-life. This cutter can be used in procedures such as fracture repair in which pins need to be inserted to give stability and support to the weakened area. This instrument is available in two lengths 16″ and 18″ and is end cutting thus making it able to satisfy a variety of patient needs and surgeon preferences.

Compare
Add to wishlist
SKU: UCC-01-1305 Category:
Description
Name Pin Cutter – Side Cutting, Tungsten Carbide
Lead Time Lead time advised within 48 hours of order placement.
Competitor ;3245-47;3245-57;3245-47_3245-57;
Specialty Neuro, Ortho & Spine-Wire/Pin Cutters & Pliers
Material Finish Stainless Steel/Tungsten Carbide
Grade Premium Operating Room
Units of Measurement Each
Manufacturer Ophthalmic Zone
Sterility Non-Sterile
Usage Reusable
Reviews (0)

Reviews

There are no reviews yet.

Be the first to review “Pin Cutter – Side Cutting, Tungsten Carbide”

Your email address will not be published. Required fields are marked *

Shipping & Delivery
wd-ship-1
wd-ship-2

MAECENAS IACULIS

Vestibulum curae torquent diam diam commodo parturient penatibus nunc dui adipiscing convallis bulum parturient suspendisse parturient a.Parturient in parturient scelerisque nibh lectus quam a natoque adipiscing a vestibulum hendrerit et pharetra fames nunc natoque dui.

ADIPISCING CONVALLIS BULUM

  • Vestibulum penatibus nunc dui adipiscing convallis bulum parturient suspendisse.
  • Abitur parturient praesent lectus quam a natoque adipiscing a vestibulum hendre.
  • Diam parturient dictumst parturient scelerisque nibh lectus.

Scelerisque adipiscing bibendum sem vestibulum et in a a a purus lectus faucibus lobortis tincidunt purus lectus nisl class eros.Condimentum a et ullamcorper dictumst mus et tristique elementum nam inceptos hac parturient scelerisque vestibulum amet elit ut volutpat.

Related products

Compare
Quick view
Add to wishlist

Flat Nose Pliers

Read more
SKU: UCC-01-1277
serrated jaws, 5-1/2" (14.0 cm) Flat Nose Pliers are ideally suited for use in manipulation of wire. Particularly these pliers can be used in situations where it is required to make very sharp, angled bends in the wire. The wider tip makes this instrument ideal for grasping Steinmann pins and K-wires. Additionally this instrument measure 5.5" long and is forged from premium German grade steel making it a finely crafted and reliable instrument.
Compare
Quick view
Add to wishlist

Hercules-Type Cable Cutter

Read more
SKU: UCC-01-1282
replaceable tungsten carbide blades, for 1.0 mm to 2.0 mm cables, 7" (18.0 cm) Hercules-Type Cable Cutter can be used to trim and adjust the length of cables. This instrument features replaceable tungsten carbide blades that can be used on for cables from 1.0 mm to 2.0 mm. Tungsten carbide jaws gives this instrument added strength as it is the hardest metal made for surgical instruments and results in a supremely durable jaw that can be used for sustained cutting. Additionally this instrument is 7" long and has gold tipped handles.
Compare
Quick view
Add to wishlist

End Cutter – Barrel Spring, Small, Tungsten Carbide

Read more
SKU: UCC-01-1274
tungsten carbide jaws, w/ coil spring, maximum capacity 1/16" (1.7mm), 6" (15.0 cm) End Cutter is a unique instrument designed for cutting of surgical pins or wire. Many orthopedic and neurosurgical spinal procedures require the use of such stabilization accessories to prevent trauma during recovery and confer additionally stability. This instrument is particularly well suited for end cutting which allows it to be made flush with the edge of bone or other tissue areas where it is being used. Additionally this end cutter features tungsten carbide jaws and has a maximum capacity of 1/16".
Compare
Quick view
Add to wishlist

Hercules-Type Wire Cutter – 2.2 mm Wire Max

Read more
SKU: UCC-01-1285
for drill-wires of max 2.2 mm, replaceable tungsten carbide blades & replaceable rubber jaws, 7" (18.0 cm) Hercules-Type Wire Cutter is a highly reliable instrument made for use in a variety of surgical procedures that require wire and thus cutting of wire. This wire cutter is specifically designed for use with drill-wires at a maximum 2.2 mm. This instrument features replaceable tungsten carbide blades which are inherently more durable than stainless steel and have an extended service-life. It also features replaceable rubber jaws making it highly versatile and customizable to accommodate a vast array of surgical scenarios. This instrument is available in either a standard design or left-handed.
Compare
Quick view
Add to wishlist

End Cutter – Double Spring, Large, Tungsten Carbide

Read more
SKU: UCC-01-1275
tungsten carbide jaws, double-action, maximum capacity 3?32" (2.5mm), 8-1/2" (21.6 cm) End Cutter is a unique instrument designed for cutting of surgical pins or wire. Many orthopedic and neurosurgical spinal procedures require the use of such stabilization accessories to prevent trauma during recovery and confer additionally stability. This instrument is particularly well suited for end cutting which allows it to be made flush with the edge of bone or other tissue ares where it is being used. Additionally this end cutter is double-action and features tungsten carbide jaws with a maximum capacity of 3/32".
Compare
Quick view
Add to wishlist

Delicate Wire Cutter – Tungsten Carbide

Read more
SKU: UCC-01-1270
tungsten carbide jaws, cuts up to 1/36" (0.7 mm) diameter hard wire, 4-3/4" (12.1 cm) Delicate Wire Cutter is a versatile instrument crafted for use in trimming and cutting lengths of wire. Procedures such as laminectomies require addition of wire to confer some stability to the vertebrae to prevent trauma as healing occurs. This particular cutter is specifically designed for use with delicate wires. It features tungsten carbide jaws and are capable of cutting hard wire up to a diameter of 0.7 mm.
Compare
Quick view
Add to wishlist

Flat Nose Pliers & Cutter

Read more
SKU: UCC-01-1278
3.5mm tip, cuts 0.2 mm to 1.5 mm wire, 6-1/2" (16.5 cm) Flat Nose Pliers are ideally suited for use in manipulation of wire. Particularly these pliers can be used in situations where it is required to make very sharp, angled bends in the wire. The delicate jaw of this instrument tapers to 2 mm which allows it to be used in manipulating cerclage wire. Additionally this instrument measure 6" long and is forged from premium German grade steel making it a finely crafted and reliable instrument.
Compare
Quick view
Add to wishlist

Cable Cutter – Tungsten Carbide

Read more
SKU: UCC-01-1267
tungsten carbide jaws, maximum capacity 2.0 mm, 7" (18.0 cm) Cable Cutter is an instrument ideally suited for use in orthopedic procedures. A number of surgical interventions require the placement of steel wires or cable to confer additionally stability to an area of bone. Specifically cable can be used in total hip arthroplasty to give more secure fixation and prevent trauma during the healing process. After inserting the cable it needs to be trimmed and manipulated to be the perfect length for that unique patients scenario. Additionally this instrument features tungsten carbide jaws and has a maximum capacity of 2.0 mm.