Click to enlarge
Needle Nose Pliers - Delicate Jaws
Needle Nose Pliers - Delicate Jaws
Back to products
Needle Nose Pliers - Standard Jaws
Needle Nose Pliers - Standard Jaws

Needle Nose Pliers – Delicate Jaws W/ Groove

delicate, jaws w/ notch, 2.0 mm tapers to 1.0 mm at tip, 5-1/2″ (14.0 cm) Needle Nose Pliers can be used in a variety of ways to manipulate wire. These pliers are of a delicate design and features jaws with a groove that allows for ease in grasping wire. This instrument is specially-designed for use with cerclage wire which is used in fracture repair to approximate the bony fragments that have been repaired. In this way this wire confers added stability and accelerates the healing process.

Compare
Add to wishlist
SKU: UCC-01-1298 Category:
Description
Name Needle Nose Pliers – Delicate Jaws W/ Groove
Lead Time 0-3 days
Competitor ;OS3071;OS3072;275565;275-565;KI48242;KI-48-242;145040;14-5040;323339;32-3339;374100;0-48245;71170063;048245;1450-40;
Specialty Neuro, Ortho & Spine-Wire/Pin Cutters & Pliers
Material Finish Stainless Steel
Grade Premium Operating Room
Units of Measurement Each
Manufacturer Ophthalmic Zone
Sterility Non-Sterile
Usage Reusable
Reviews (0)

Reviews

There are no reviews yet.

Be the first to review “Needle Nose Pliers – Delicate Jaws W/ Groove”

Your email address will not be published. Required fields are marked *

Shipping & Delivery
wd-ship-1
wd-ship-2

MAECENAS IACULIS

Vestibulum curae torquent diam diam commodo parturient penatibus nunc dui adipiscing convallis bulum parturient suspendisse parturient a.Parturient in parturient scelerisque nibh lectus quam a natoque adipiscing a vestibulum hendrerit et pharetra fames nunc natoque dui.

ADIPISCING CONVALLIS BULUM

  • Vestibulum penatibus nunc dui adipiscing convallis bulum parturient suspendisse.
  • Abitur parturient praesent lectus quam a natoque adipiscing a vestibulum hendre.
  • Diam parturient dictumst parturient scelerisque nibh lectus.

Scelerisque adipiscing bibendum sem vestibulum et in a a a purus lectus faucibus lobortis tincidunt purus lectus nisl class eros.Condimentum a et ullamcorper dictumst mus et tristique elementum nam inceptos hac parturient scelerisque vestibulum amet elit ut volutpat.

Related products

Compare
Quick view
Add to wishlist

Flat Nose Pliers & Cutter

Read more
SKU: UCC-01-1278
3.5mm tip, cuts 0.2 mm to 1.5 mm wire, 6-1/2" (16.5 cm) Flat Nose Pliers are ideally suited for use in manipulation of wire. Particularly these pliers can be used in situations where it is required to make very sharp, angled bends in the wire. The delicate jaw of this instrument tapers to 2 mm which allows it to be used in manipulating cerclage wire. Additionally this instrument measure 6" long and is forged from premium German grade steel making it a finely crafted and reliable instrument.
Compare
Quick view
Add to wishlist

Delicate Wire Cutter – Tungsten Carbide

Read more
SKU: UCC-01-1270
tungsten carbide jaws, cuts up to 1/36" (0.7 mm) diameter hard wire, 4-3/4" (12.1 cm) Delicate Wire Cutter is a versatile instrument crafted for use in trimming and cutting lengths of wire. Procedures such as laminectomies require addition of wire to confer some stability to the vertebrae to prevent trauma as healing occurs. This particular cutter is specifically designed for use with delicate wires. It features tungsten carbide jaws and are capable of cutting hard wire up to a diameter of 0.7 mm.
Compare
Quick view
Add to wishlist

Flat Nose Pliers – Slender Jaws

Read more
SKU: UCC-01-1279
slender jaws, 2.0 mm tip, 6" (15.2 cm) Flat Nose Pliers and Cutter is a multi-functional instrument that can be used as a pliers to manipulate the wire but also as a cutter to trim it to the appropriate length. This combination instrument also features a tapered jaw that allows it to access some areas that are more difficult to get to. Additionally, the flat nose prevents any trauma to surrounding tissue areas.
Compare
Quick view
Add to wishlist

End Cutter – Barrel Spring, Small, Tungsten Carbide

Read more
SKU: UCC-01-1274
tungsten carbide jaws, w/ coil spring, maximum capacity 1/16" (1.7mm), 6" (15.0 cm) End Cutter is a unique instrument designed for cutting of surgical pins or wire. Many orthopedic and neurosurgical spinal procedures require the use of such stabilization accessories to prevent trauma during recovery and confer additionally stability. This instrument is particularly well suited for end cutting which allows it to be made flush with the edge of bone or other tissue areas where it is being used. Additionally this end cutter features tungsten carbide jaws and has a maximum capacity of 1/16".
Compare
Quick view
Add to wishlist

Cannulated Pin Cutter

Read more
SKU: UCC-01-1268
end cutting, max cutting capacity 1/16" (1.7 mm), 7-1/2" (19.0 cm) Cannulated Pin Cutter is a specialized instrument ideally suited or use in procedures of fracture repair or other procedures where a graft is set with a pin. The unique design of this cutter allows for effective end cutting. The entire head portion of the pin can be inserted into the cutter and clipped flush and the remaining clipped portion remains held in the cutter to be removed. The maximum cutting capacity of this pin cutter is 1.7 mm.
Compare
Quick view
Add to wishlist

Flush Wire Cutter – Tungsten Carbide

Read more
SKU: UCC-01-1280
tungsten carbide jaws, double-action, front & side cutting, cuts up to 1/16" (1.7 mm) diameter hard wire, 7" (17.8 cm) Flush Wire Cutter is an instrument designed for use in cutting wires during surgical procedures. A variety of procedures require the insertion of wire to stabilize an inserted graft or fracture repair. This decreases potential for trauma and increases the speed of healing. This cutter features double-action tungsten carbide jaws that allow for precise cuts on wire up to 1.7 mm diameter. This instrument can be used for both front and side cutting.
Compare
Quick view
Add to wishlist

Blunt Jaw Pliers

Read more
SKU: UCC-01-1265
5-1/2" (14.0 cm) Blunt Jaw Pliers can be used in a variety of surgical procedures that require the insertion and manipulation of wires. This instrument features slightly rounded handles which makes it easy to hold and operate manually and is a traditionally utility poliers with adjustable jaws. The blunt jaws prevent breakage and splintering of the wire and allows for increased pressure to reshape it to the appropriate shape. Wires can be used to approximate fractures or can be inserted through skin and bone to provide traction on the bone.
Compare
Quick view
Add to wishlist

Lineman Pliers

Read more
SKU: UCC-01-1290
side-cutting, maximum capacity 1.6 mm, 8-1/2" (21.6 cm) Lineman Pliers are a multi-purpose instrument designed for use in surgical procedures to manipulate wire. Many orthopedic surgeries such as fracture repair depend on the use of wire to approximate the fragments and accelerate the healing process. Wires must be manipulated and wrapped to fit the particular scenario where they are needed and these pliers are built for that. They features tungsten carbide jaws and are side cutting with a maximum capacity of 1.6 mm.