Hemostatic Forceps
(Stieglitz) Splinter Forceps
SKU:
UCC-01-117
(Stieglitz) Splinter Forceps
5-1/2" (14.0 cm)
Williams (Stiegliz) Splinter Forceps are handcrafted from surgical grade German stainless steel. Designed with pointed, serrated tips and broad grasping surfaces, these forceps are available with straight, 45 degree angle, or 90 degree angled tips. The ratcheting finger rings assure a secure and steady grip on what is being removed.
3K Round Knife Handle
SKU:
UCC-01-640
beaver-type, round knurled handle, for mini blades
3K Round Knife Handle is a beaver-type that is intended to be used for microsurgical procedures to make smaller incisions. This knife handle is associated with the mini blade series 50, 60, and 70 and consists of a round, knurled gripping surface to contribute to a better hold and minimize the chance of slippage.
Abdominal Detachable Retractor
SKU:
UCC-01-476
Abdominal Detachable Retractor
set includes: 1 pair of 2-1/2" (6.4 cm) wire lateral snap-on blades, 1 pair of 3-1/2" (8.8 cm) wire lateral snap-on blades & one (1) center blade
Balfour Abdominal Detachable Retractor is a system that includes one pair of 2 ½" wire lateral snap-on blades, one pair of 3 ½" wire lateral snap-on blades, and one center blade. The center blade is offered in a varity of sizes to accommodate patients. Its ideal function is to be used during a laparotomy in which abdominal incisions need to remain open to uncover the area. Additionally, this retractor is self-retaining, which allows it to be held in place to allow the surgeon to focus on the task and avoid holding it.
Abdominal Retractor
SKU:
UCC-01-477
Abdominal Retractor
standard pattern
O'Sullivan-O'Connor Abdominal Retractor is a standard pattern that is available in a variety of choices. For example, the complete set includes the retractor frame with a variety of different blades and wingnuts, which may also each be purchased separately. Generally, this self-retaining retractor is utilized when a midline incision needs to be held open, but may also be applied in hysterectomies.
Abdominal Retractor – Deep Blades
SKU:
UCC-01-478
Deep blades, two (2) each blades 1-3/4" x 4-1/4" (4.5 cm x 10.6 cm), w/ wingnuts
O'Sullivan-O'Connor Abdominal Retractor is available in complete sets that include deep blades that are either 3" or 4" in depth. The rest of the blades that are included are various sizes and shapes to account for the special needs of the operation. This retractor can be primarily used to hold abdominal incisions open and is also self-retaining to make it easier for the surgeon to perform the surgery without manually holding the device.
Abdominal Retractor W/ Fixed Side Blades – 2 1/2″ Deep
SKU:
UCC-01-479
w/ fixed fenestrated side blades, 2-1/2" deep & center blade #2470-72 (3" x 2")
Balfour Abdominal Retractor with Fixed Side Blades incorporates 2 ½" deep fenestrated side blades that are attached onto the center blade, which is 3" wide x 2" deep. Two different sizes of this retractor are offered according to the maximum spread they provide. The side blades of this particular retractor can be pushed and held away from each other to open up an incision in the abdominal cavity.
Adair-Allis Tissue Forceps
SKU:
UCC-01-118
9x10 teeth, 6" (15.0 cm)
Adair-Allis Tissue Forceps are 6" long and are primarily used in general procedures in instances such as when diseased tissue needs to be held. The 9x10 teeth on the tips of the jaws provide a sure grasp of the tissue being held, and can also be used to approximate the edges of the membrane that creates the abdominal cavity lining.
Adlerkreutz Tissue Forceps
SKU:
UCC-01-119
Adlerkreutz Tissue Forceps
4x5 teeth
Adlerkreutz Tissue Forceps are handcrafted from surgical grade German stainless steel. Designed with 4x5 teeth for a secure grip on tissues. The design allows precise dissection and tissue handling while the teeth assure a secure grasp. Available in a 6" or 8" model.
Adlerkreutz Tissue Forceps – Narrow Jaws
SKU:
UCC-01-120
Narrow jaws, 2x3 teeth
Adlerkreutz Tissue Forceps are handcrafted from surgical grade German stainless steel. Designed with narrow jaws and 2x3 teeth for a secure grip on tissues. The slim design allows for delicate and precise dissection and tissue handling while the wider grip assures a comfortable grip for the surgeon.
Adson Artery Forceps
SKU:
UCC-01-121
Adson Artery Forceps
Adson Artery Forceps can be used as a hemostat for general surgeries to regulate bleeding of broken arteries in the course of an operation. These forceps are developed with ring-handles and a locking ratchet to ensure a firm grasp on the artery. They are also offered in a delicate or standard pattern with the choice of curved or straight jaws.
Adson Artery Forceps – Delicate
SKU:
UCC-01-122
Delicate pattern, 1x2 teeth, 7-1/8" (18.0 cm)
Adson Artery Forceps are 7 1/8" and are developed with 1x2 teeth in a delicate pattern with either curved or straight jaws to suit different needs. Primarily applied during operations in which arteries need to be grasped or compressed, the teeth on the tips of the jaws interlock to confirm that a tight grip is held.
Adson Bayonet Dressing Forceps
SKU:
UCC-01-123
7-1/2" (19.0 cm)
Adson Bayonet Dressing Forceps are handcrafted from surgical grade German stainless steel. Designed with its bayonet handle angled and 90 degrees from the grasping direction, these dressing forceps offer a leverage not seen with standard models. The serrated handle assures a firm grip on this instrument.