Electrosurgical
Delicate Skin Hooks
Bone Graft Harvesting Forceps (Graft Cutter)
SKU:
UCC-01-888
Bone Graft Harvesting Forceps (Graft Cutter)
adjustable depth control, 8-3/4" (22.0 cm)Bone Graft Harvesting Forceps are designed for use in orthopedic bone grafting procedures. These forceps are designed to harvest portions of bone for use in grafts in other parts of the body or even for use in a different patient. This instrument is also referred to as a graft cutter and comes equipped with an adjustable depth control. These forceps are available either 10.0 mm wide making it appropriate for 9.0 – 12.0 mm grafts or 7.0 mm wide making it appropriate for 6.0 – 9.0 mm grafts.
Bone Graft Holder (Caspar Type)
SKU:
UCC-01-889
8.0 mm x 15.0 mm tip, 21.0 cm
Capsar Type Bone Graft Holder is ideally suited for use in orthopedic type procedures that require the use of a bone graft. This instrument is made to hold and handle the bone graft until it is inserted into the area where it is necessary and secured into place. This holder features a large rounded handle from which extends a body that ends in a mechanism for grasping the bone graft. This instrument features a 8.0 mm x 15.0 mm tip
Bone Graft Impactor (Caspar Type)
SKU:
UCC-01-890
Bone Graft Impactor (Caspar Type)
graduated 1/4" to 1-1/4", shaft 6-1/4" (16.0 cm)Bone Graft Impactor is of the Casper type and is a multi-purpose instrument that can be used in a variety of orthopedic procedures. Specifically it is designed for use in bone grafting procedures to ensure that the graft is properly settled into place. It features a handle from which the tapering body extends ending in a small circular head perfect for setting on the graft and applying force. This instrument is graduated ¼" to 1 ¼" and features a shaft of 6 ¼". This instrument is available in three sizes 3.0 mm, 5.0 mm and 8.0 mm.
Caspar Cervical Vertebral Body Distractor
SKU:
UCC-01-891
Caspar Cervical Vertebral Body Distractor Caspar Cervical Vertebral Body Distractor is a specialized instrument crafted for use in neurosurgical procedures, specifically those of the spine. A distractor aids in creating separation of joint surfaces without causing rupture of binding ligaments without causing any displacement. This can be used in herniated disc procedures to repair pinched nerves or other procedures of the spine. This instrument is available in either a left or right design.
Cervical Vertebral Body Multi Level Distractor elongated toothed bar
SKU:
UCC-01-892
Cervical Vertebral Body Multi Level Distractor
elongated toothed bar Caspar Cervical Vertebral Distractor Drill Guide is crafted for use alongside the Casper Cervical Vertebral Distractor. Some spinal procedures also require the use of a drill and this guide can be used in conjunction with them to ensure the drill follows the trajectory intended by the surgeon. Additionally the use of a guide helps to protect surrounding tissue areas from the trauma that can be inflicted by a high powered tool like a drill. This instrument is available in either a left or right design making it suitable for a variety of specific purposes.
Depth Gauge
SKU:
UCC-01-893
Depth Gauge Depth Gauge is designed for use in a variety of situations, specifically those in which holes are drilled into bone. This gauge can be used to measure the depth of holes that have been drilled such a initial pilot holes or burr holes in surgeries such as craniotomies. This instrument can be used to precisely make holes that are the specific depth that is needed to expose the surgical field without causing undue damage to the surrounding area. This gauge is available in two sizes: small at 13.0 cm and large at 21.3 cm making it suitable for a variety of different surgical scenarios.
Distraction Screws
SKU:
UCC-2053
Distraction Screws
package of 5Distraction Screws are an accessory that is usually used alongside distractors or a distraction screwdriver that is spec. These screws are ideally suited for use in spinal surgeries specifically in minimally invasive procedures. These instruments are designed to distract disc space to allow a clearer view of the surgical field to ensure adequate space for the surgeon to perform the spinal surgery. These screws are available in three sizes 14.0 mm, 16.0 mm and 18.0 mm in a package of 5.
Screw Driver
SKU:
UCC-01-894
Screw Driver
8" (20.0 cm)
Screw Drive is a multi-purpose instrument that can be used widely in a number of different surgical procedures. It features a smooth handle from which extends a narrower neck. This instrument measures 9" and is formed from German operating room grade stainless steel which makes it a long lasting and reliable instrument with unparalleled longevity
Twist Drill
SKU:
UCC-01-895
Twist Drill
drilling depth 8.0 mm, length 5-3/4" (14.6 cm)
Twist Drill is a unique drilling instrument designed to create new holes to increase access to certain areas such as through the skull to the brain tissue. This instrument is crafted to distribute the force from the center of the drill point out and thus is ideal in creating new holes without the use of pilot holes. A variety of surgeries including craniotomies can benefit from a specialized drill such as this one. Additionally this instrument has a drilling depth of 8.0 mm and a length of 14.6 cm.
Vertebral Body Dissector (Caspar Type)
SKU:
UCC-01-896
Vertebral Body Dissector (Caspar Type)Caspar Type Vertebral Body Dissector is ideally suited for use in neurosurgical procedures of the spine. A dissector is designed to be inserted between the vertebral bodies to increase the space between two adjacent vertebrae. This increase in space allows for the surgeon to see the surgical field more clearly and also gives adequate space for the procedure to be performed. This dissector is available in small or large making it an adequate fit for a variety of patient needs and surgeon preferences.