Click to enlarge
Bishop Bone Holding Forceps
Bishop Bone Holding Forceps
Back to products
Bone Clamp (Reposition Forceps)
Bone Clamp (Reposition Forceps)

Bone Clamp

Bone Clamp

curved, extra long ratchet, 5-3/4″ (14.5 cm)

Bone Clamp is a versatile surgical instrument that can be used in a vast array of surgeries. It can be used in seismoidectomy procedures to grasp the small sesamoid bone or it can be used in simple grasping of long bones to aid in alignment. It features curve blades that allow it to dip into the surgical field while allowing the handle of the instrument to remain out of the surgical field. Additionally this clamp features an extra long ratchet that further increases its versatile and widths it can be set at.

Add to wishlist
Compare
Make An Enquiry
SKU: UCC-01-898 Categories: ,
Name Bone Clamp
Lead Time Lead time advised within 48 hours of order placement.
Specialty Neuro, Ortho & Spine-Bone Holding Forceps
Material Finish Stainless Steel
Grade Premium Operating Room
Units of Measurement Each
Manufacturer Ophthalmic Zone
Sterility Non-Sterile
Usage Reusable

Reviews

There are no reviews yet.

Be the first to review “Bone Clamp”

Your email address will not be published. Required fields are marked *

wd-ship-1
wd-ship-2

MAECENAS IACULIS

Vestibulum curae torquent diam diam commodo parturient penatibus nunc dui adipiscing convallis bulum parturient suspendisse parturient a.Parturient in parturient scelerisque nibh lectus quam a natoque adipiscing a vestibulum hendrerit et pharetra fames nunc natoque dui.

ADIPISCING CONVALLIS BULUM

  • Vestibulum penatibus nunc dui adipiscing convallis bulum parturient suspendisse.
  • Abitur parturient praesent lectus quam a natoque adipiscing a vestibulum hendre.
  • Diam parturient dictumst parturient scelerisque nibh lectus.

Scelerisque adipiscing bibendum sem vestibulum et in a a a purus lectus faucibus lobortis tincidunt purus lectus nisl class eros.Condimentum a et ullamcorper dictumst mus et tristique elementum nam inceptos hac parturient scelerisque vestibulum amet elit ut volutpat.

RELATED PRODUCTS

Compare
Quick view
Add to wishlist

Bone Graft Harvesting Forceps (Graft Cutter)

Read more
SKU: UCC-01-888
Bone Graft Harvesting Forceps (Graft Cutter) adjustable depth control, 8-3/4" (22.0 cm)Bone Graft Harvesting Forceps are designed for use in orthopedic bone grafting procedures. These forceps are designed to harvest portions of bone for use in grafts in other parts of the body or even for use in a different patient. This instrument is also referred to as a graft cutter and comes equipped with an adjustable depth control. These forceps are available either 10.0 mm wide making it appropriate for 9.0 – 12.0 mm grafts or 7.0 mm wide making it appropriate for 6.0 – 9.0 mm grafts.
Compare
Quick view
Add to wishlist

Bone Graft Holder (Caspar Type)

Read more
SKU: UCC-01-889
8.0 mm x 15.0 mm tip, 21.0 cm Capsar Type Bone Graft Holder is ideally suited for use in orthopedic type procedures that require the use of a bone graft. This instrument is made to hold and handle the bone graft until it is inserted into the area where it is necessary and secured into place. This holder features a large rounded handle from which extends a body that ends in a mechanism for grasping the bone graft. This instrument features a 8.0 mm x 15.0 mm tip
Compare
Quick view
Add to wishlist

Depth Gauge

Read more
SKU: UCC-01-893
Depth Gauge Depth Gauge is designed for use in a variety of situations, specifically those in which holes are drilled into bone. This gauge can be used to measure the depth of holes that have been drilled such a initial pilot holes or burr holes in surgeries such as craniotomies. This instrument can be used to precisely make holes that are the specific depth that is needed to expose the surgical field without causing undue damage to the surrounding area. This gauge is available in two sizes: small at 13.0 cm and large at 21.3 cm making it suitable for a variety of different surgical scenarios.
Compare
Quick view
Add to wishlist

Screw Driver

Read more
SKU: UCC-01-894
Screw Driver 8" (20.0 cm) Screw Drive is a multi-purpose instrument that can be used widely in a number of different surgical procedures. It features a smooth handle from which extends a narrower neck. This instrument measures 9" and is formed from German operating room grade stainless steel which makes it a long lasting and reliable instrument with unparalleled longevity
Compare
Quick view
Add to wishlist

Twist Drill

Read more
SKU: UCC-01-895
Twist Drill drilling depth 8.0 mm, length 5-3/4" (14.6 cm) Twist Drill is a unique drilling instrument designed to create new holes to increase access to certain areas such as through the skull to the brain tissue. This instrument is crafted to distribute the force from the center of the drill point out and thus is ideal in creating new holes without the use of pilot holes. A variety of surgeries including craniotomies can benefit from a specialized drill such as this one. Additionally this instrument has a drilling depth of 8.0 mm and a length of 14.6 cm.