Hemostatic Forceps
Delicate Skin Hooks
Rigby Retractor
SKU:
UCC-01-572
Rigby Retractor
blades 13/16" x 2-1/2" deep (2.1 cm x 6.4 cm), 7-1/2" (19.1 cm)
Rigby Retractor is self-retaining, which allows it to be kept in place once applied in a desired position. The ring-handles contribute to better handling of the instrument and are comprised of a locking mechanism that enables it to be maintained. Furthermore, the 2 ½" deep flat blades play a role in the retraction method during procedures such as an appendectomy.
Rochester-Ochsner Forceps
SKU:
UCC-01-314
Rochester-Ochsner Forceps
1x2 teeth
Rochester-Ochsner Forceps are hemostats that are helpful for clamping off blood vessels to avoid bleeding during procedures such as orthopedic surgery. In order to clamp vessels or grasp tissue, these forceps have 1x2 teeth on the tip of the serrated jaws. This "rat-tooth" can be described as one point on one end of the jaw that suits amongst two teeth on the end of the other jaw. These teeth can be functional for gripping dense tissue. Different lengths of these ring-handled forceps are presented to assist numerous cases.
Rochester-Pean Forceps
SKU:
UCC-01-315
Rochester-Pean Forceps
Rochester-Pean Forceps include long serrated jaws that are primarily used as a hemostatic agent to clamp bigger blood vessels. The fully serrated jaws and locking ratchet mechanism reduces the possibility of the vessels or collection of tissues from sliding or moving. These forceps are offered in straight or curved jaws in a wide variety of lengths to accommodate a range of cases.
Roeder Towel Forceps
SKU:
UCC-01-316
Roeder Towel Forceps
5-1/4" (13.3 cm)
Roeder Towel Forceps are typically used to fasten draping material during surgical operations. The tips of the jaws contain sharp points and ball-stops to prevent deeper penetration. This forceps are also able to stay in place with the use of the built-in locking ratchet on the ring-handles.
Rogers-Type Hysterectomy Forceps
SKU:
UCC-01-1384
2x3 atraumatic teeth, sarot-style shanks, 1-1/2" (38.0 mm) jaw length, 8-3/4" (22.0 cm) Rogers-Type Hysterectomy Forceps are designed to clamp the tough ligament on both sides of the uterus in a hysterectomy procedure. The atraumatic teeth provide a firm grip with minimal tissue injury. The forceps are available with straight, curved, or angled blades to accommodate a wide range of cases.
Roux Retractor
SKU:
UCC-01-573
Roux Retractor
double-ended
Soux Retractor is a double-ended handheld retractor that contains strongly curved ends on each side. When an incision is made during a surgical procedure, this retractor is able to hold back tissues or organs so that the surgeon can approach the area that will be operated.
Rowland-Ruskin Forceps
SKU:
UCC-2613
Rowland-Ruskin Forceps
double-action, narrow jaws, 7-1/8" (18.0 cm) Rowland-Ruskin Forceps are a unique designed instrument ideally suited for use in a number of different procedures that require clipping of small bones. These forceps features a spring handle as well as double-action, narrow jaws. These are well suited for areas such as the orbit of the eye as well as bones in the nasal area. These forceps are available in two different profiles straight or curved making it well suited for access in a number of surgical scenarios.
Rubio Needle Holder & Wire Twister
SKU:
UCC-01-1307
tungsten carbide, serrated jaws, snub nose Rubio Needle Holder & Wire Twister is a multi purpose instrument designed for use in a variety of surgical procedures. Specifically the jaws of this tool are crafted to effectively grip and manipulate fine metallic forms such as needles or wires. This instrument can be used to grasp and manipulate needles in procedures that require suturing and creating needles holes. Additionally it can be used to handle wire such as when it is placed and twisted to do things such as stabilize the vertebrae after laminectomies of the spine. This instrument features tungsten carbide, serrated jaws and is available in two lengths 5" and 7 5/8".
Rumel Dissecting & Artery Forceps
SKU:
UCC-01-317
Rumel Dissecting & Artery Forceps
9" (23.0 cm)
Rumel Dissecting and Artery Forceps are 9" long and are polished to a dull, satin finish to help minimize glare from operating room lights. This forceps is popular during thoracic procedures due to the partially serrated jaws and ability to grip arteries or pass tapes around the arteries of the heart. Depending on the surgeon's needs, this instrument is offered in four different curved jaw styles.
Rush Awl & Reamer
SKU:
UCC-01-911
Rush Awl and Reamer is a highly specialized piece of equipment ideally suited for use in orthopedic procedures that require making holes in bone. This two in one awl and reamer can be used to create holes in bone as well as to enlarge them significantly. The straight sharp type blade can be rotated in order to create a larger opening such as in reaming of medullar canals. It is available in 2.5 mm, 3.0 mm, 5.0 mm and 6.0 mm diameters.
Ruskin Duckbill Bone Rongeur
SKU:
UCC-2614
Ruskin Duckbill Bone Rongeur
double-action, jaws 5.0 mm x 15.0 mm, 7-1/8" (18.0 cm)
Ruskin Duckbill Bone Rongeur is a uniquely designed instrument for use in orthopedic surgeries. Like a typical rongeur this instrument can be used to grasp and cut bone but also features scoop type jaws that allows it to be used to clear out bone or bony areas. Unique to this rongeur is its duckbill shape that gives it an angle that increases its ability to access certain bony areas. This rongeur is double-action and features jaws that are 5.0 mm x 15.00 mm making them well suited for a vast array of surgical interventions.
Ruskin Rongeur
SKU:
UCC-2616
Ruskin Rongeur
double-actionRuskin Rongeur is designed as a multi purpose instrument to be used in a variety of surgical procedures that require handling of bone. These rongeurs features a scoop type jaw that allows them to be used in scooping out or clearing space in bone to increase access to the surgical field or to remodel the bone. This rongeur is double-action and is available in two lengths 7.25" and 9.5" and varies in profile: straight or curved and in jaw width either 5.0, 6.0 or 7.0 mm.